FIRE-RETARDANT PVC VINYL JACKET for UR 3, 5 & 10 Excellent general use material for most water-soluble coolants and cutting fluids, fine mesh grits and powders, de-ionized water, and limited protection from pressurized water spray/mist 13-oz vinyl may be specified for lighter-weight or in lower-temp applications (below 40F) Very low level of chemical...
HYPALON JACKET for UR3, 5 & 10 Excellent material for use in high-abrasion environments as well as metal chips (de-burr/cutting) Provides limited protection from water spray/mist while offering good levels of chemical resistance Limited range of color choices available 17 OZ / 480 grams Stock: On request
ALUMINUM COATED KEVLAR UR3 JACKETfor UR3, 5 & 10: Excellent material for use in high and low heat environments, light sparks and for UV protection Nominal insulating factor of R-0.1 Maximum radiant operating temperature of 1500F / 815C. Minimum operating temperature -65F / 53C Silver in color Stock: On request
DENIER NYLON JACKET for UR3, 5 & 10 Excellent general use material for basic protection from dust, dirt and large grit Not suited for use in wet applications as the material is breathable Very low level of abrasion resistance Wide range of color choices available 12 OZ / 340 grams Stock: On request
WELD SPLATTER JACKET for UR3, 5 & 10 Excellent material for use in low-inertia weld splatter and heavy spark applications Maximum sustain (radiant) operating temperature of 500F/260C. Short-term exposure to 700F/370C Grey in color Stock: On request
This flexible jacket provides a full protective cover for the UR arms UR5 and UR10. With no zippers or buttons and made with built-in elasticity, the UNI-jacket is easy to use and to apply to the robot. Stock: On request
BN UNI-JACKET PRO for UR3, UR 5 & UR10 This flame retardant protection jacket is designed for painting robots, and will secure your robot from dirt, oil and stains. The UNI-jacket PRO is made with a Velcro closure and is easy attached to the robot. Stock: On request